Checks to be carried out before starting:
a. Check the lubricating oil level.
b. Check that refill flex hoses are in good condition.
c. Open the condensate valve and drain.
START AND STOPPING OF COMPRESSOR
1. Before starting the compressor OPEN condensate discharge points.
2. Press START pushbutton (a), ON position. Close the condensate discharge points.
3. To switch motor off again press the STOP button (Red button).
BOTTLE REFILL
1. Fit the hose connector 1 on the bottle connector 2 (closed).
2. Open the condensate discharge valve 3 on the separator.
3. Start the compressor.
4. Close the discharge valve 3.
5. Open the bottle valve 4. (A)
6. Discharge the condensate every 10-15 minutes of use.
Starting scba compressor
Starting scba compressor
Scba compressor starting procedure
AFTER REFILL IS COMPLETED
A. Close the bottle valve 4. (A)
B. Open the condensate discharge valve 3 and let all the air bleed out. (B)
C. Switch of the compressor.(C)
D. Disconnect the coupling 1 from the bottle